The way of welding robot controlling molten pool temperature
From the existing technology point of view, it is no longer a problem to realize the automation and intelligence of welding machine. The appearance of welding robot is a good proof. Even so, some of the core parts are strictly controlled, such as temperature. Because the temperature of its molten pool will directly affect the welding quality, and there are many interference factors, so it is difficult to control. However, the following measures are relatively effective, including:
According to the space position and welding level of the welding seam in the operation, the appropriate welding current and electrode diameter can be selected for the welding robot. For example, when the welding is opened, the larger welding current and larger electrode diameter can be selected, which is easier to control the molten pool temperature and is the basis of weld formation.
At the same time, to grasp the angle of welding rod, the reference principle is that when the angle between the electrode and the welding direction is 90 degrees, the temperature of the molten pool is relatively high. With the decrease of the included angle, the temperature of the molten pool will gradually decrease. In addition, the key point is between the arc combustion. If the temperature of the molten pool is too high, the arc burning time can be reduced, the temperature of the molten pool will be reduced, and the weld bead will be avoided.
This article comes from the customization of automatic welding equipmenthttp://www.teamzook.com
-
12-20
Methods to reduce welding deformation and control
I. causes and types of welding deformation causes of welding deformation: welding deformation refers to the deformation of weldments during and after welding. During welding, the molten metal and the base metal near the seam expand and produce plastic deformation. During solidification, the weld and the metal near the seam contract. This is the longitudinal stress and the transverse stress. Make the weld longitudinal and transverse shrinkage, so that the weldment deformation. Because the heat e
-
12-20
Specific differences between grinding machine and polishing machine
Difference: the workpiece processed by grinding machine is rough, and the surface finish of workpiece processed by polishing machine is better, but high finish can be achieved by installing precise grinding wheel on grinding machine. Grinding machine: electric grinder reciprocating electric polishing grinder (also known as file mill). It is widely used in the fine machining and surface polishing of the mold profession. It is a substitute for similar pneumatic products. The main outstanding featu
-
12-20
How to improve the efficiency of straight seam welding machine?
The straight seam welding machine is widely used in ordinary times, and our appeal to the seam welding machine is constantly strengthened. We should know about the operation of the seam welding machine. The straight seam welding machine is not only excellent in spot welding machine, but also excellent in seam welding machine. A good machine must be equipped with a good operator. It is not simple to be a good operator. In addition to the accumulation of time experience, it also needs many tips, s
-
12-20
How to deal with the failure of welding robot?
General welding robot factory has the following shortcomings: a) human shortcomings caused by improper operation, mainly including welding gun damage in welding robot factory, improper loading and unloading of workpieces, and no deformation of positioner follow-up. B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device. C) improper environmental protection